S R Industrial are approved installers of Capital Safety Group
Products
The proposed height safety regulations require the building
operator to have safety systems in place to protect those who may operate,
service or maintain equipment within their premises, as so far as is reasonably
practicable. For infrequent access this could be provided by temporary systems,
however, if equipment is to be visited on a regular basis, more permanent
systems should be used.
Capital Safety equipment can provide safe access to many of these
Ariana Restraint and Arrest
Systems
- A shuttle slides along
cable attached permanently to a structure. Connected to the shuttle, the
user can move safely along the system without needing to detach.
- Horizontal linear and / or
curved used, slopes up to 15°.
- intermediate recovery
maximum distance 12m
- breaking strength > 37 kN
- pre-tension 0.8 klN
- complies with
EN 795 classe C
Cabloc
- The Cabloc system is
designed to protect access to tower heads, poles, chimneys etc ... .
- The Cabloc system protects the user without any
hindrance by sliding freely along the cable to which it is attached
permanently.
- comply with CE
0086 EN 353-1 and 353 -2
Hercule
- The Hercule life line is an
anchorage device equipped with a rigid horizontal anchorage line. A mobile
carriage (réf. AN200) slides along a rail attached permanently to a
structure. This device is suitable for use as a fall arrester system or a
suspension system.
- comply with EN
795 classe D
Railbloc
- The railbloc consists of a
vertical fall arrest system sliding along a special vertical rail installed
permanently and parallel to the movement track. It protects against falls
during climbing to and descent from the working position.
- comply with CE
0086 EN 353-1
The video quality is poor to enable a fast download speed, if you require a
better quality version telephone 01344 860145 and we will send out a CD
S R Industrial can provide Annual testing for system compliance